Afoundry Default Login – Username, Password and IP Address

Default IP for Afoundry

Default logins for Afoundry

Afoundry Router Login

Follow these steps to set up your Afoundry Router.

1. Connect the cable from your router to either your laptop or computer. Alternatively, you can use the wireless network.

Recommendation – It is imperative to use a wired connection while configuring the Afoundry router. Saving your changes without saving them can lead you to be suddenly logged out of your device.

2. Open your internet browser of choice and type in the IP address for your Afoundry router. If you don’t know what that is, it can be found on the back of your router next to one of its four ports (usually).

3. Navigate to the login page of your router, if you know your username and password. If you do not know your login information or it has been changed then you will need to reset the router back to factory defaults using the factory reset button located on most routers.

Afoundry Routers Help

If you’re having trouble logging in to your router, it’s likely due to the incorrect username and password. Make sure that you record both of these before changing them again.

• If you forgot your login password try hard resetting your router by holding down the small black button located on the back of it for 10-15 seconds. This will restore all of your default settings and make it so that you can log in again easily.
• Router login page not loading? If the login page is not loading, try this easy fix! Make sure the device you’re using is connected to Wi-Fi. Check if the wrong router IP address has been set as the default one.
• Pages can sometimes take longer to load or have trouble connecting. This can happen when the IP address of your Network changes. In this case, please consult our list of IP addresses and locate the one that matches your Network – if you are unsure, please see our article about how to find your router’s IP address for assistance.

Models using Afoundry

FAQ Brands