Default IP for Adtran
Default logins for Adtran
IP Address: 192.168.1.1
Username: admin
Password: admin
Adtran Router Login
Here are the steps for logging in to your Adtran router.
1. Connect the router’s cable to your computer. Alternately you can use your wireless network.
Recommendation – A wired internet connection is preferable when configuring the Adtran router, as this decreases the chance of being disconnected in case you’re saving your changes.
2. Open your browser of choice and input the IP address for your Adtran router in the URL field. You can find this number on the back of your wireless device.
3. You now need to enter your router’s default username and password. You will find these either by looking it up online or checking the manual that came with your router or if you do not know them then you can try using a generic password (usually found online).
Adtran Routers Help
If you cannot access your router settings, then it is likely because you either input the wrong login information or forgot to change it before logging out. Make sure to write down the new username and password before disconnecting from the device.
- In order to remedy forgetting your router password, try resetting it. To do this, find the small black button at the rear of your router and use it to turn off the power for about 10 minutes. After waiting for about ten minutes press and hold the button again until power is restored; which will put your router back into its original state.
- Router login page not loading? If the login page is not loading, make sure that you are connect to Wi-Fi from your device. You will also need to check if the wrong router IP address has been set as the default one.
- Sometimes pages take too long to load, if this is the case; your network might be using a different IP address. This can happen when switching between networks often. If this happens, check out our updated IP Address List and locate the right number. If you still need help, see our tutorial on how to find your router’s IP Address- it has all of the answers!
Models using Adtran
1004W
1004WB
admin / admin
admin / admin
192.168.1.1
192.168.1.1
FAQ Brands
What is the username and password of Adtran routers?
The majority of the Adtran routers has a default username of admin and a default password of admin
What is the default password of a Adtran router?
The majority of the Adtran routers have the default password admin
What is the default IP of a Adtran router?
The majority of the Adtran routers use 192.168.1.1 as the default IP address
How to log in to a Adtran router?
First, type the router’s IP address in your browser; this will bring you to the login screen. Once there, enter your username and password for access before clicking either OK or LOGIN.
Above, you can find the most probable default credentials.
How to troubleshoot a Adtran router?
First, make sure that the WAN cable is plugged into an available WAN labeled port of your router. Second, see if you can connect to Wi-Fi network or a local area network (LAN) by plugging an Ethernet cable into an open LAN labeled port of your router.
How to reset Adtran router login password?
Resetting the admin password of most Adtran routers can usually be done by pressing a push button on the router for five to ten seconds.
