Default IP for ADI Engineering
ADI Engineering Router Login
Follow these steps to successfully log-in to your ADI Engineering router.
1. Connect your laptop or computer to the router with an ethernet cable. Alternatively, you can connect wirelessly if this option is available for you.
Recommendation – When setting up the ADI Engineering router, it is recommended to use a wired connection – this way you avoid getting logged off unexpectedly if you save your changes.
2. Type the IP Address of your ADI Engineering router into your web browser. This will display the login screen for your device.
3. Now, we will start by logging in to your router using the default username and password. You should find this information on your manual or on a sticker that was put onto your device when it was first manufactured. If you do not have these details, there are some default passwords available online if you search for ADI Engineering.
ADI Engineering Routers Help
If you cannot login to your router, then it is likely that you are entering the wrong username and password. Keep these details written down after changing them so they will not be forgotten again later.
- Have you forgotten your password for logging into your router? If so, you can always hard reset it by pressing and holding the small black button found at the back of your router for around 10 seconds. This will return all settings to their original state!
- Router login page not loading? If the login page is not loading, make sure that the device you are using is connected to a Wi-Fi network and has an Internet connection. Check if there is an incorrect router IP address set as default which might cause problems with logging in.
- Sometimes when pages load too slowly or won’t load at all, it’s because they are hosted on a different IP address than you’re currently connecting through. If this occurs, consult our IP address router list and enter the number of the one hosting the page to which you are trying to access. Then contact us if you need any assistance accessing that content – we’ve got tutorials for everything!
Models using ADI Engineering
Pronghorn SBC250
PronghornSBC-250-RTR
–
–
192.168.1.1
–
FAQ Brands
What is the username and password of ADI Engineering routers?
Many of the ADI Engineering routers are setup with a default username of admin and a default password of admin.
What is the default password of a ADI Engineering router?
The majority of the ADI Engineering routers have the default password admin
What is the default IP of a ADI Engineering router?
The majority of the ADI Engineering routers use 192.168.1.1 as the default IP address
How to log in to a ADI Engineering router?
First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.
Above, you can find the most probable default credentials.
How to troubleshoot a ADI Engineering router?
First, make sure the WAN cable is plugged into the right port labeled WAN located at the back of your router. Then make sure you’re connected either by an available Wi-Fi signal or a hardwired connection through one of the four ports labeled LAN.
How to reset ADI Engineering router login password?
Resetting the admin password of ADI Engineering’s routers is quick and easy. One simply has to push a reset button, which can be found on the front side of the router, for 5 to 10 seconds until it blinks twice.