Default IP for Accton
Based on your IP address, select one of the options from the list above and click Admin. Once you are done you will be directed to an external website which will allow you to log in to your router’s administration panel for password verification purposes.
Default logins for Accton
IP Address: 192.168.1.1
Username: –
Password: root
Accton Router Login
To login to your Accton Router, please follow the instructions below.
1. If you are using a laptop, connect the Ethernet cable from the router to your computer. If you are using an Internet tablet or smart phone then turn on its wi-fi function.
Recommendation – In order to set up the Accton router properly, it’s important to use a wired connection- or else you run the risk of being randomly logged out if you save any changes during setup.
2. Open your preferred web browser and type the IP address of your Accton router in the address bar, which you can find printed on the back of it.
3. Access the admin panel of your router by typing in your username and password if it was not preset or you do not know what it is. If this does not work, then try to log in with one of the default passwords for an Accton router.
Accton Routers Help
If you cannot login to your router, it means that either the username or password was incorrect. Make sure to remember what they were before changing them so they can be logged in correctly.
- If you’ve forgotten your password, you can try resetting it using a hard reset on your router. To do this, locate the small black button at the back of your device and hold it down for around 10 seconds. This will restore it to factory default settings.
- Router login page not loading? If the login page is not loading, make sure you are connected to the wifi. You may also need to fix your router IP address if it has been set incorrectly.
- Occasionally, pages will load slowly or just refuse to load. This usually happens when there are problems with the network’s IP address. To fix this issue, consult our IP address list and find the correct one based on your needs. If you need further assistance troubleshooting this problem, refer to our tutorial for finding an IP address for a router if needed.
Models using Accton
MR3202A
WG3005B 1-17
WG3005B1-17
WG3005D
WG4005A-17
– / root
–
–
–
–
192.168.1.1
–
–
–
–
FAQ Brands
What is the username and password of Accton routers?
Most Accton routers come pre-programmed with the default username of admin and the default password of admin.
What is the default password of a Accton router?
The majority of the Accton routers have the default password admin
What is the default IP of a Accton router?
The majority of the Accton routers use 192.168.1.1 as the default IP address
How to log in to a Accton router?
First, you must type the router’s IP address into your web browser. If you need assistance finding it, there are instructions on how to find your router in this article. Once you have found it, enter your username and password to log in.
Above, you can find the most probable default credentials.
How to troubleshoot a Accton router?
First, make sure the WAN cable is plugged into the back of the router with a label that says WAN. Next, use either your Wi-Fi connection or connect via LAN cables to one of the ports labeled LAN at the back of the router.
How to reset Accton router login password?
Resetting the admin password of most Accton routers is easy; all you need to do it push a reset button on the router until it starts blinking red, which usually takes anywhere from five to ten seconds.
