3JTech Default Login – Username, Password and IP Address

Default IP for 3JTech

Based on your local IP address, choose one of the listed IP addresses and click it. This should redirect you to your router’s administrative dashboard where you will be able to do what you need to do.

Default logins for 3JTech

IP Address:                                                                                        192.168.8.1

Username:                                                                                        cameras

Password:                                                                                          cameras

3JTech Router Login

Follow these instructions to login to your 3JTech Router.

1. Please connect your ethernet cable from the modem to your laptop. Alternately, you may choose to connect wirelessly.

Recommendation – While setting up the 3JTech router it is best to use an Ethernet cable for a wired connection rather than wireless. If you are using wireless, you may find yourself unable to edit your settings if they lose internet connection while saving.

2. Turn on your computer and open up the internet browser of your choice. In the search bar at the top, type in 192.168.1.1 which is the default IP address for many common routers such as Linksys or D-link routers; some manufactures may change this though so you may need to visit their website for specific information about your router’s configuration settings).

3. Enter the default username and password of your router by accessing the admin panel. If you don’t know your login credentials, try one of the following three passwords for 3JTech routers.

3JTech Routers Help

If you cannot log in to your router, you may be entering the wrong username and/or password. After changing them for the first time, remember to write down both credentials so you don’t forget which one is what again.

• Don’t worry about forgetting your password! Hard resetting your router login couldn’t be easier. All you need to do is find the small black button located on the back of it and then hold it down for ten seconds before letting go. What does this do? Well, it sets everything back up as if you just took it out of its box again which includes setting a new password too!
• Router login page not loading? If the login page is not loading, make sure the device you are using is connected to the wi-fi. To also ensure that there isn’t an incorrect router IP address set as default on it (ie 192.168.1.1), please try resetting it by pressing down for 5 seconds on both buttons for 10 seconds and then release them when finished.
• Occasionally, pages might experience loading problems or show an error when trying to load. When this happens, it is possible that your network has switched its IP address. If you are having difficulty finding it on our list of routers, please refer to our tutorial for locating your router’s IP address.

Models using 3JTech

FAQ Brands