Default IP for 3Com
Based on your current location based off of your internet protocol (IP) address you will need to find which one corresponds with where you are located and then select it below. This will redirect you to the login interface for your router.
Default logins for 3Com
IP Address: 192.168.1.1 100 %
Username: admin
Password: –
3Com Router Login
Follow these instructions to login to your 3Com Router.
1. Connect the Ethernet cable from your laptop or computer to your router using the appropriate port. Alternatively, you can connect wirelessly if you have internet access.
Recommendation – It’s best to use a wired connection while setting up the 3Com router. This prevents you from getting disconnected suddenly when saving your changes.
2. Open your preferred internet browser and input the IP address of your 3Com router in the search bar. You will find this information on the back or bottom of your router.
3. Now enter the default username and password of your router by accessing the admin panel. If you don’t have your username and password, or if you are unsure about what it might be, then you can try one of the default passwords for 3Com routers.
3Com Routers Help
If you’re having trouble logging in to your router, it might be because you’re inputting the wrong credentials. Make sure you write down both your old and new login information after changing it so that you don’t forget what it was.
- Is it time to set up your new computer or mobile device? If you forgot your login password, try hard resetting the router. To do this, find and press the small black button found at the rear of your router for 10 seconds until it resets back to factory settings.
- Router login page not loading? Make sure the device you’re using is connecting to a wireless network connection. You may also need to check for an incorrect IP address being set as the default for your router.
- Pages may sometimes experience slow loading or problems with speed. This can happen when the network you are accessing has a different IP address than what is being used by your computer. If this happens, refer to our IP Address list of Routers and look for the right number. If you need any assistance, please visit our Tutorial on finding your Router’s IP Address for instructions.
Models using 3Com
3CRTRV10075
3CRWDR101B-75
3CRWDR101B-75 (WL-552)
3CRWDR200A-75
3CRWDR300A-73
3CRWE454G72
3CRWE50194
3CRWE51196
3CRWE53196
3CRWE754G72-A
3CRWER100-75
3CRWER200-75
3CRWER300-73
HomeConnect 3CRWE50194
OfficeConnect 3CRTRV10075 (WL-534)
OfficeConnect 3CRWDR200A-75
OfficeConnect 3CRWE454G72
OfficeConnect 3CRWE51196
OfficeConnect 3CRWE52196
OfficeConnect 3CRWE554G72TU
OfficeConnect 3CRWER100-75
OfficeConnect 3CRWER200-75
–
admin / –
–
admin / –
admin / –
–
–
–
admin / –
–
–
–
admin / –
admin / –
admin / –
–
–
–
–
admin / –
admin / –
–
–
192.168.0.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
–
192.168.2.1
192.168.1.1
–
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.2.1
192.168.0.1
192.168.1.1
–
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
FAQ Brands
What is the username and password of 3Com routers?
The majority of the 3Com routers have a default username of admin and a default password of admin
What is the default password of a 3Com router?
The majority of the 3Com routers have the default password admin
What is the default IP of a 3Com router?
The majority of the 3Com routers use 192.168.1.1 as the default IP address
How to log in to a 3Com router?
First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.
Above, you can find the most probable default credentials.
How to troubleshoot a 3Com router?
First, ensure the cable connecting your modem to the router is securely plugged in to the WAN port labeled WAN. Next, try establishing a connection by either using a wireless signal or an ethernet cord plugged into a LAN-labeled port of the router.
How to reset 3Com router login password?
Resetting the administrator password of most 3Com routers is surprisingly easy; all it takes is a few seconds of holding down the reset button found on the backside of the device.